Mai kunna wutar lantarki
BNE Series Electric Actuator
Fahimtar abin da ke hana fashewa
Ka'idojin jerin GB3836 sun ƙayyade nau'ikan nau'ikan nau'ikan da ba sa fashewa da kuma ƙa'idodin ƙira, kerawa, dubawa da gwaji masu alaƙa.
Nau'in na'urar kunna wutar lantarki ta jerin BNE mai hana fashewa shine "nau'in hana wuta" (Exd).
(1) Nau'in hana harshen wuta (Exd)
Mai kunna wutar yana barin fashewa ta faru a cikin kayan aikin, kuma an tsara saman harsashi mai hana wuta don hana cikiƁarkewar mai ɗaukar fashewar daga tuntuɓar duniyar waje. Daidaitaccen sarari mai hana wuta da isasshen tsawonA lokaci guda, ƙarfin harsashin zai iya jure matsin lamba da ke cikin samfurin ke haifarwa tare da tabbatar da amincin samfurin.fashewa ba tare da lalacewa ba. Jerin abubuwan da ke hana fashewa na BNE a cikin ramin motar, ramin kayan lantarki da kumaAn tsara kuma an ƙera shi bisa ga ma'aunin hana harshen wuta na ramin layi.
(2) ƙimar hana fashewa
Matsayin hana fashewa na na'urar kunna wutar lantarki ta BNE mai hana fashewa: ExdllCT4Gb
Nau'in kariya daga fashewa, wanda aka bayyana a matsayin "nau'in kariya daga wuta";
Nau'in Il-Na'ura, wanda ke nuna kayan aikin lantarki don yanayin iskar gas mai fashewa banda ma'adinan kwal;
C-Matsayin fashewa, wanda ke ƙayyade girma (tsawo da izinin) kowane haɗin wutar da ke hana wuta na mai kunna wutar;
Ƙungiyar zafin jiki ta T4, wadda ke nuna cewa matsakaicin zafin saman actuatoris ya yarda ya zama 135°C;
Gb-Yana nuna matakin kariya na na'urar.
(3) Tsarin da ke hana fashewa na samfuran BNE masu hana fashewa ya yi daidai da tanadin da ya dace na GB3836.1-201 "Muhalli mai fashewa Kashi na 1:
Bukatun gabaɗaya don kayan aiki》da GB3836.2-2010《Yanayin fashewa Kashi na 2: Kayan aiki da aka kare ta hanyar gidan wuta mai hana wuta》
daidaitaccen tsari, kuma yana ɗaukar tsarin hana wuta na dukkan injin.
Umarnin mai kunna wutar lantarki mai hana fashewa na BNE
Da fatan za a karanta umarnin kafin amfani. Kafin shigarwa da amfani, don Allah a tabbatar da hakan a ƙasa:
a. Shiryawa da takardu;
①Jerin samfura② rahoton gwaji③zanen wayoyi;
b. Rahoton duba; Lambar suna; Zane-zanen wayoyi na lantarki ya yi daidai da odar siye;
c. Kafin ƙarshen saita maɓallin iyaka. Kada a sa mai kunna ya kasance a buɗe ko a rufe gaba ɗaya;
d. Bayan kammala amfani da wayoyi na lantarki, don magance hanyar haɗin kebul a cikin hanyar rufewa.
Sunan tsarin samfurin da wasu sassa
Bayanin Samfuri
Ana amfani da na'urar kunna wutar lantarki mai hana fashewa ta jerin BNE don sarrafa bawul ɗin juyawa mai 0-270°, kamar bawul ɗin malam buɗe ido, bawul ɗin ƙwalloAna amfani da shi sosai a fannin man fetur, sinadarai, sarrafa ruwa, jirgi, takarda, wutar lantarkitashoshi, samar da dumama, sarrafa kansa na gini, masana'antar haske da sauransu. Samar da wutar lantarki ta AC 380v/220v/110v don tuƙi da wutar lantarki,Siginar halin yanzu ta 4-20 mA, ko siginar ƙarfin lantarki ta 0-10 VDC don zama siginar sarrafawa, na iya sa bawul ɗin ya motsa zuwa ga abin da ake buƙatamatsayi, gane sarrafa sarrafa kai. Matsakaicin ƙarfin fitarwa shine 1500 Nm
Tsarin samfuri
Siffofin gini
•Gidaje
Gidaje na ƙarfe na aluminum, foda mai rufi na polyester, juriya mai ƙarfi ga lalata, aji na kariya shine IP66.
•Mota
Motar keji ta squirrel, girman babban kanti, babban juyi mai ƙarancin inertia aji F, makullin kariya mai zafi fiye da kima da aka gina a ciki, na iya hana motardaga zafi fiye da kima.
•Aikin hannu
Tsarin jagora mai aminci da inganci yana da sauƙin amfani da hannu. Amma a tabbata an "kashe" wutar kafin a yi amfani da hannu. Lokacin da aka kunna wutar,Makullin kyauta ne, saka shi a cikin soket ɗin kusa da jiki don adanawa.
•Alamar Dome
Madubin gani yana nuna a sarari, kuma lura ya fi fahimta da dacewa.
•Na'urar busar da kaya
Ana amfani da Dryeris don sarrafa zafin jiki da kuma guje wa danshi na ciki wanda ke haifar da canjin yanayi ko yanayin zafi.
Don kiyaye abubuwan lantarki a bushe.
•Hatimi
Kyakkyawan hatimi. Matsakaicin matakin kariya daga samfura shine IP66, kuma zaɓi ne na IP67.
•Maɓallin iyaka
Iyakar matsayi biyu na injina da na lantarki. Sukurin iyaka na injina yana da daidaito, aminci kuma abin dogaro; Ana sarrafa makullin iyaka na lantarkiTa hanyar tsarin cam, sauƙin daidaita cam ɗin zai iya saita matsayi daidai da dacewa, kuma yawan aiki da aiki ba ya shafar shi.
•Kulle kai
Tsarin tsutsa mai inganci da gear yana da babban juyi mai inganci kuma yana fitar da babban ƙarfin juyi. Kuma aikin kulle kansa ne, yana hana
reverse.transmission partissable kuma abin dogaro, babu buƙatar ƙarin mai.
•Ƙulle mai hana kashewa
Lokacin da aka cire murfin, ƙullin da aka makala a kan harsashi, ba zai faɗi ba.
•Shigarwa
Haɗin ƙasa yana bisa ga ISO5211/DiN3337. Ana iya shigar da shi a cikin shigarwa a tsaye da kwance.
•Da'ira
Da'irar sarrafawa ta dace da daidaitaccen samar da wutar lantarki na matakai ɗaya ko uku, tsarin da'ira yana da ma'ana, tashoshi masu ƙarfi na iya aiki yadda ya kamatabiyan buƙatun aiki iri-iri.
Zane-zanen da'ira
Lura: Zane-zanen da'ira na nau'in sarrafawa (tare da sarrafa filin) ana komawa zuwa littafin jagora na module.
BNE005 Girman gabaɗaya da sigogin aiki
| Samfuri | BNE005 | ||||
| Tushen wutan lantarki | DC24V | AC24V | AC110V | AC220V | AC380V |
| Ƙarfin mota | 20W | 15W | |||
| Matsayin halin yanzu | 1.8A | 2A | 0.5A | 0.3A | 0.1A |
| Lokaci/ƙarfin juyi na yau da kullun | 20S/50Nm | 30S/50Nm | |||
| Lokacin zaɓi/ƙarfin juyi | 25S/80Nm | 30S/50Nm 15S/30Nm 30S/30Nm 30S/80Nm | |||
| Nau'in aiki | SRP DC DR DP PL T | ||||
| Kusurwar Juyawa | 0-90° don zaɓi | ||||
| Ƙarfin jurewa | DC24V/AC24V 500VDC 60S AC110V/AC220V/AC380V 1500VAC 60S | ||||
| Juriyar rufi | DC24V/AC24V 100MΩ/250VDC AC110V/AC220V/AC380V 100MΩ/500VAC | ||||
| Ajin kariya | IP66 | ||||
| Haɗin lantarki | Haɗin gwiwa mai hana fashewa | ||||
| Na'urar kariya | (nau'in dawo da atomatik) mai kare zafi | ||||
| Maɓallin iyaka | Aikin lantarki: makullin rufewa/buɗe iyaka; Aikin hannu: iyaka ta injiniya | ||||
| Wurin Shigarwa | A kowace kusurwa | ||||
| Zafin aiki | -20℃-60℃ | ||||
| Kayan jiki | Titin aluminum | ||||
| Zaɓin aiki | Dehydrating dehydrating hita, clutch handwheel | ||||
| Madadin samfurin | BNE008 | ||||
BNE010 Girman gabaɗaya da sigogin aiki
| Samfuri | BNE010 | ||||
| Tushen wutan lantarki | DC24V | AC24V | AC110V | AC220V | AC380V |
| Ƙarfin mota | 25W | 25W | |||
| Matsayin halin yanzu | 2A | 2.2A | 0.6A | 0.3A | 0.2A |
| Lokaci/ƙarfin juyi na yau da kullun | 20S/100Nm | 30S/100Nm | |||
| Lokacin zaɓi/ ƙarfin juyi | 15S/100Nm 30S/150Nm | ||||
| Nau'in aiki | SRP DC DR DP PL T | ||||
| Kusurwar Juyawa | 0-90° don zaɓi | ||||
| Ƙarfin jurewa | DC24V/AC24V 500VDC 60S AC110V/AC220V/AC380V 1500VAC 60S | ||||
| Juriyar rufi | DC24V/AC24V 100MΩ/250VDC AC110V/AC220V/AC380V 100MΩ/500VAC | ||||
| Ajin kariya | IP66 | ||||
| Haɗin lantarki | Haɗin gwiwa mai hana fashewa | ||||
| Na'urar kariya | (nau'in dawo da atomatik) mai kare zafi | ||||
| Maɓallin iyaka | Aikin lantarki: makullin rufewa/buɗe iyaka; Aikin hannu: iyaka ta injiniya | ||||
| Wurin shigarwa | A kowace kusurwa | ||||
| Zafin aiki | -20℃-60℃ | ||||
| Kayan jiki | Gilashin aluminum | ||||
| Zaɓin aiki | Dehydrating dehydrating hita, clutch handwheel | ||||
| Madadin samfurin | BNE015 | ||||
BNE020/040 Girman gaba ɗaya da sigogin aiki
| Samfuri | BNE020 | BNE040 | |||||
| Tushen wutan lantarki | DC24V | AC110V | AC220V | AC380V | AC110V | AC220V | AC380V |
| Ƙarfin mota | 35W | 40W | 40W | 40W | 60W | 60W | 60W |
| Matsayin halin yanzu | 4.5A | 0.8A | 0.4A | 0.2A | 1A | 0.5A | 0.3A |
| Lokaci/ƙarfin juyi na yau da kullun | 20S/200Nm | 40S/200Nm | 40s/400Nm | ||||
| Lokacin zaɓi/ƙarfin juyi | 20S/200Nm | 20S/400Nm | |||||
| Nau'in aiki | SRP DC DR DP PL T | ||||||
| Kusurwar Juyawa | 0-90° don zaɓi | ||||||
| Ƙarfin jurewa | DC24V 500VDC 60S AC110V/AC220V/AC380V 1500VAC 60S | ||||||
| Juriyar rufi | DC24V 100MΩ/250VDC AC110V/AC220V/AC380V 100MΩ/50VAC | ||||||
| Ajin kariya | IP66 | ||||||
| Face na Wutar Lantarki | Haɗin gwiwa mai hana fashewa | ||||||
| Na'urar kariya | (Nau'in dawo da atomatik) mai kare zafi | ||||||
| Maɓallin iyaka | Aikin lantarki: makullin rufewa/buɗe iyaka; Aikin hannu: iyaka ta injiniya | ||||||
| Wurin shigarwa | A kowace kusurwa | ||||||
| Zafin aiki | -20℃-60℃ | ||||||
| Kayan jiki | Gilashin aluminum | ||||||
| Zaɓin aiki | Dehydrating dehydrating hita, clutch handwheel | ||||||
Girman verall na BNE060/100/1500 da sigogin aiki
| Samfuri | BNE060 | BNE100 | BNE150 | |||||||
| Tushen wutan lantarki | DC24V | AC110V | AC220V | AC380V | AC110V | AC220V | AC380V | AC110V | AC220V | AC380V |
| Ƙarfin mota | 70W | 90W | 90W | 90W | 120W | 120W | 120W | 140W | 140W | 140W |
| Matsayin halin yanzu | 7A | 2.2A | 1.1A | 0.3A | 2.4A | 1.2A | 0.4A | 2.6A | 1.3A | 0.4A |
| Daidaitaccen lokaci/ƙarfin juyi | 20S/400Nm 30S/600Nm | 40S/600Nm | 40S/1000Nm | 55S/1500Nm | ||||||
| Nau'in aiki | SRP DC DR DP PL T | |||||||||
| Kusurwar Juyawa | 0-90° don zaɓi | |||||||||
| Ƙarfin jurewa | DC24V 500VDC 60S AC110V/AC220V/ AC380V 1500VAC 60S | |||||||||
| Juriyar rufi | DC24b 100MΩ/250VDC AC110V/AC220V/AC380V 100MΩ/500VAC | |||||||||
| Ajin kariya | IP65 | |||||||||
| Haɗin lantarki | Haɗin gwiwa mai hana fashewa | |||||||||
| Na'urar kariya | (nau'in dawo da atomatik) mai kare zafi | |||||||||
| Maɓallin iyaka | Aikin lantarki: makullin rufewa/buɗe iyaka; Aikin hannu: iyaka ta injiniya | |||||||||
| Wurin shigarwa | A kowace kusurwa | |||||||||
| Zafin aiki | -20℃-60℃ | |||||||||
| Kayan jiki | Gilashin aluminum | |||||||||
| Zaɓin aiki | Dehydrating dehydrating hita, clutch handwheel | |||||||||
Shigarwa da daidaitawa
1 Bukatun yanayin shigarwa
1) Nau'ikan ko nau'ikan kayan fashewa da ke kewaye da wuraren na'urorin dole ne su kasance daidai da ƙa'idar hana fashewa ta wannan samfurin.
2) An shigar da shi a cikin ruwa mai ambaliya kuma a waje don Allah a yi bayani a gaba.
3) Da fatan za a ajiye wayoyi, sararin haya na babban gida kamar aikin shekara-shekara.
4) Domin gujewa ruwan sama, hasken rana kai tsaye, kuna buƙatar shigar da murfin kariya, ko kuma zaɓar matakin kariya na IP67.
5) Alkiblar shigarwa ta asali don kiyaye taga zuwa sama, shigarwar masu kunna bututun mai a tsaye, kebul na haɗin gwiwazuwa ƙasa.
2 Zafin yanayi, matsakaicin zafin jiki
1) Zafin yanayi yana cikin kewayon -30℃ -60℃.
2) Idan zafin jiki na ambulan ya ƙasa da sifili, shigar da adehumidifier a cikin injin.
3) Lokacin da matsakaicin aiki ya yi tsayin daka, maƙallin da aka haɗa da bawul ɗin yana taka rawa wajen rage kwararar zafi.
4) Lokacin da matsakaicin zafin aiki ya ƙasa da 60*C, da fatan za a zaɓi tallafin da ya dace.
5) Lokacin da matsakaicin zafin aiki ya wuce 60℃, don Allah zaɓi maƙallin zafin jiki mai girma.
Haɗin bawul 3
1) Juya bawul ɗin da hannu, tabbatar da cewa babu wani yanayi na rashin daidaituwa, sannan ka juya zuwa matsayin da aka rufe gaba ɗaya, sannan ka gyara tallafin
a kan bawul ɗin.
2) Sanya injin kunna wutar lantarki a kan goyon baya da kuma screwiton a hankali tare da ƙusoshi da goro.
3) Juya na'urar kunna wutar lantarki zuwa matsayin da aka rufe, sannan a gyara shaft ɗin valve da shaft ɗin fitarwa na na'urar kunna wutar lantarki tare da haɗin gwiwa da sukurori.
4) Yi amfani da makullin don juya na'urar kunna wutar lantarki, motsi yana da santsi, yi hankali kada ka ketare iyakar canjin iyaka. Lura:
Lokacin shigarwa, tabbatar cewa maɓallin kunnawa ya yi daidai da maɓallin bawul ɗin. Flange ɗin da ke ƙasanMai kunna ya cika ƙa'idar IS0 5211, kuma idan bawul ɗin da aka haɗa ya cika wannan ƙa'idar. Ana iya haɗa shi cikin sauƙi; Idan ba a cika wannan ƙa'idar ba, ana buƙatar ƙarin haɗin maƙallin
Daidaitawa 4
1) Daidaita iyaka ta bugun jini
Juya ƙafafun hannu don motsa mai kunna wutar zuwa wurin da bawul ɗin ya rufe gaba ɗaya. Sannan, sassauta iyakar goro mai matsewa na CAM tare da wrench, juya iyakar CAM (rawaya a buɗe, ja a rufe) don daidaita shi don kawai danna maɓallin iyaka na ƙasa, kuma ji sautin dannawa sau 2 sannan a ƙara matse iyakar CAM, daidaita cikakken matsayin rufewa, kuma saita cikakken matsayin buɗewa ta hanya ɗaya. (Kamar yadda aka nuna a Hoto na 12)
2) Daidaita iyaka ta inji
Sake sassauta iyakar injin goro sannan ka tabbatar da cewa na'urar ta motsa zuwa wurin da aka rufe gaba ɗaya. Juya goro mai iyakancewa, sannan ka daina juyawa idan ya haɗu da kayan aikin da ke da siffar fanka a ciki sannan ka danne da'irori biyu sannan ka danne goro a ƙarshe. (An nuna a Hoto na 13)
3) Daidaita potentiometer
Potentiometer siginar fitarwa ce ta fitarwa a cikin na'urar kunnawa, tare da fil uku na fitarwa, fil na tsakiya shine fitarwa, kuma gefen hagu da dama sune tushen wutar lantarki (lura: resistor bai kamata ya sami ƙimar juriya ta sifili da abin tsalle ba). Yi amfani da makullin don juya bawul ɗin zuwa matsayin da aka buɗe gaba ɗaya. Yi amfani da multimeter don auna aikin maɓallin iyaka. Daidaita juriyar fil akan tashar zuwa kewayon 350-600. Idan bai yi daidai ba, ana iya daidaita shi ta hanyar juya kayan aikin trans potentiometer, (Kamar yadda aka nuna a Hoto na 14)
5 Aikin Gwaji
1) Aikin hannu
Kashe wutar lantarki kafin yin aiki da hannu. Saka hannun hannu a cikin ramin hexagonal a ƙarƙashin murfin roba.
Lura: Buɗewa zuwa cikakken buɗewa da cikakken rufewa, bayan juyawar iyaka ta juya shalfdrcle, zai ci karo da toshewar injiniya. Idan juyawar ta yi yawa, zai haifar da lalacewar wasu sassan, ya kamata a yi amfani da ƙarfi mai yawa.
2) Aikin wutar lantarki
Kafin fara aikin wutar lantarki:
Tabbatar cewa alamar da ke kan ma'aunin matsayi da kuma buɗewar bawul ɗin sun yi daidai da juna
Tabbatar cewa an haɗa da'irori yadda ya kamata, haka kuma cewa na'urar tana aiki ba daidai ba tare da maɓallan waje.
1) Duba tsarin wayoyi, samar da wutar lantarki, siginar shigarwa/fitarwa daidai.
2) Kada a canza wayoyin da ke ciki
3) Da fatan za a duba jagorar juyawa idan wutar lantarki tana da matakai uku.
4) Tabbatar cewa mai kunna wutar yana wurin kunnawa/kashewa, kunna wutar sannan ka shigar da alamar buɗewa
5) Idan na'urar kunna wutar lantarki ta gudu zuwa ga buɗaɗɗen alkibla, to yana nufin cewa wayar ta yi daidai.
5) Idan na'urar kunna wutar lantarki ta gudu zuwa ga buɗaɗɗen alkibla, to yana nufin cewa wayar ta yi daidai.
6) Idan ba haka ba, dole ne a canza layukan waya guda biyu na layin waya guda uku.
6 Kulawa da shafawa
1) Samfurin yana amfani da man shafawa na musamman na tushen molybdenum, don haka babu buƙatar ƙara mai;
2) Juyawa akai-akai: Idan bawul ɗin bai yi aiki na tsawon lokaci ba, ana iya tuƙa injin akai-akai don duba abubuwan da ba su dace ba;
3) Don tsarin nau'in sarrafawa (tare da tsarin kula da filin), da fatan za a duba littafin jagorar tsarin kula da actuator (haɗe da takardar fasaha)
3) Don tsarin nau'in sarrafawa (tare da tsarin kula da filin), da fatan za a duba littafin jagorar tsarin kula da actuator (haɗe da takardar fasaha)