Pneumatic Accessories

YT-1000 Series E/P Positioner

The Electro-Pneumatic Positioner YT-1000 is used for operation of pneumatic rotary or linear valve actuator by means of electrical controller of control systems with an analog output signal of DC 4 to 20mA or split ranges.

• There is no resonance at 5-200Hz.

• The change of RA/DA acting is convenient.it is able to apply to apply to single or double acting actuator.

• It is possible to prevent the hunting with orifice to the small size actuator.

• It is economical due to less air consumption.

• It is able to control the 1/2 split range with simple operation with replacement of parts.

product details

product tag

Parameters

TypeItem	Single Acting	Double Acting
Input Signal	4-20mADC
Imped dance	250±150hm
Supply Pressure	1.4~7Kg.f/cm?(20~100psi)
Stroke	0-90°
Air Conn	1/4*PT(NPT)
Gauge Conn	1/8“PT(NPT)
Electric Conn	1/2PT(NPT, PF)
Explosion proof	Ex dI IBT 6 Ex dI ICT 6 Ex iaI ICT 6
Prot rc tion	IP66
Amb.Temp	-20~60℃(-4~158°F)
Linearity	±1%F.S.	±2%F.S
Hysteresis	±1%F.S.
Sensitivity	±0.2%F.S.	±0.5%F.S.
Repeat abl ty	±0.5%F.S.
AirCon sun mpi on	3LPM(Sup=1.4kg.f/cm?, 20psi
Flow Capacity	80LPM(Sup=1.4kg.f/cm?, 20psi
Material	Aluminum, Die-Casing
Weight	2.8kg(6.2Ib)

Note: Pleasespecifythethreadtypeofair&electricconnectionuponorder.

YT-1000R is used for operation of pneumatic rotary valve actuator by means of electrical controller of control systems with an analog output signal of DC 4 to 20mA or split ranges.

YT-1000L is used for operation of pneumatic linear valve actuator by means of electrical controller of control systems with an analog output signal of DC 4 to 20mA or split ranges.